Dell PowerConnect 54 Series User Manual page 187

Figure 6-83. Community Table
Deleting Communities
1 Open the Community Table page.
2 Click Show All.
The Community Table opens.
3 Select a community from the Community Table.
4 Select the Remove check box.
5 Click Apply Changes.
The selected community entry is deleted, and the device is updated.
Configuring Communities Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the
Community Table page.
Table 6-39. SNMP Community CLI Commands
CLI Command
snmp-server community string [ro | rw | su]
[ip-address]
snmp-server host {ip-address | hostname}
community-string [1 | 2]
show snmp
Description
Sets up the community access string to permit
access to SNMP protocol.
Determines the trap type sent to the selected
recipient.
Checks the SNMP communities status.
Configuring System Information
187