Changing Oil In Tractor; Changing Engine Oil - Zetor UTILIX HT Series Operator's Manual

Changing oil in tractor

Always use quality oils as engine or transmission oil (refer to the chapter: Recommended transmission oil)
Refer to the tables 'Periodical check and service table' for the change frequency.

Changing engine oil

The grade of oil to be used will depend on the ambient temperature.
The tractor is shipped from the factory with 15W/40.
For summer use over 77°F (25°C) use SAE 30.
For temperatures from 32°F~77°F (0°C~25°C) use SAE20 or 15W/40.
For temperatures below 32°F (0°C) use SAE 10W.
Important:
When changing the oil, replace the filter at the same time.
Always use the same oil, as using different types of oils or oils with different specifications can
cause damage.
Dispose of the old oil according to valid legal regulations.
1 - Engine oil filter
2 - Level gauge
1 - Engine oil drain plug
MAINTENANCE INSTRUCTIONS
UCL18N063
U18N060
97