Change The Direction Of Drive - Using The Clutch Pedal; Gear Shifting; Gear Shifting - Using The Clutch Pedal; Gear Shifting - Using The Clutch Control Button On The Head Of Gear Shifting Lever - Zetor FORTERRA HSX 120 Operator's Manual

CHANGE THE DIRECTION OF DRIVE - USING THE CLUTCH PEDAL

1. Depress the clutch pedal and stop the tractor by foot brake.
2. Shift the reversing lever to the requested direction of tractor drive
3. Release the clutch pedal only to the point of travel engagement and with simultaneous increase of engine revolutions con-
tinue in smooth release of the clutch pedal.
4. Start smoothly and slowly.

GEAR SHIFTING

• For shifting the gear speeds while travelling use the travel clutch control by a red button of clutch control on the head of
gear shifting lever.
• When shifting gears, press and hold the red button of clutch control on the head of gear shifting lever, release the gas
pedal, throw out the gear, shift an applicable gear speed, release the red button and then increase the engine revolu-
tions.
• If operation conditions permit, use the function of multiplier preselection.

GEAR SHIFTING - USING THE CLUTCH PEDAL

Depress the clutch pedal (clutch disengaged). At the same time release the pedal of foot throttle and shift the applicable gear
speed. Release the clutch pedal smoothly (clutch is being engaged) and at the same time increase the engine revolutions
GEAR SHIFTING – USING THE CLUTCH CONTROL BUTTON ON THE HEAD OF GEAR SHIFTING LEVER
Press the clutch control button on the head of gear shifting lever. At the same time release foot throttle pedal and shift the appli-
cable gear speed. Release the button of clutch control (clutch is being engaged) and at the same time increase the engine revolu-
tions.
Note: Clutch pedal is always preselected to the use of button of clutch control on the head of gear shifting lever.
DRIVING OPERATION
61