Carl Zeiss
Fig. 2-9
Axioskop 2 plus (rear)
Fig. 2-10
HBO 100 W transformer
(front and rear)
2-8
START-UP
Initial start-up
2.1.8
Connection to the line
• Connect microscope socket (2-9/2) to the line
socket via a line cable. The microscope can be
connected to line voltage between 100 and
240 VAC, 60 - 60 Hz. The power unit sets itself
automatically to the available line voltage
within this range.
• The HBO 103 illuminator (for epi-fluorescence)
is supplied via a separate transformer. The HBO
100 W transformer must be connected to the
line via its line socket (2-10/2).
2.1.9
Switch microscope and HBO 100 W
transformer on and off
• Switch the microscope on and off using the line
switch (2-9/1).
• Switch the HBO 100 W transformer on and off
using the line switch (2-10/1).
Axioskop 2 plus
Axioskop 2 mot plus
B 40-075 e
10/03