Fig; Nosepiece With Eyes For Compensators And Dic Slider; Luminous-Field Diaphragm - Zeiss Axioskop 2 plus Operating Manual

Routine microscope
Table of Contents

Advertisement

Axioskop 2 plus
Axioskop 2 mot plus
Nosepiece with objectives
− features compartment (3-4/1) for compensators
− W 0.8" threaded mount for five objectives,
each with compartment for DIC slider (3-4/2)
− fast change of objectives by turning the knurled
ring of the nosepiece (3-4/3).
Reflector turret
− Accepts the maximum of five technique
modules
such as the FL P&C reflector module
and shutter plate for incident light and optovar
module and analyzer module for transmitted-
light
− Fast change of technique modules by turning
the knurled ring of the reflector turret.

Luminous-field diaphragm

− Wheel (3-5/2) for the continuous setting of the
luminous-field diaphragm (transmitted light).
− Additional mount (3-5/1) for filters with
diameter d = 32 mm.
Drive for condenser height adjustment
− Height adjustment of the condenser to set
KÖHLER illumination.
Stop for focusing drive
− Adjustable height stop for stage focusing.
On / Off switch
− Position 0 = instrument switched off.
− Position I = instrument switched on.
B 40-075 e
02/01
OPERATION
Operation and function controls

Fig. 3-4

Fig. 3-5
Nosepiece with eyes for
compensators and DIC slider
Luminous-field diaphragm
Carl Zeiss
3-9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Axioskop 2 mot plus

Table of Contents