Zeiss Axioskop 2 plus Operating Manual page 87

Axioskop 2 plus
Axioskop 2 mot plus
Overview of function and programming modes:
• Switch on
Start
Axioskop 2 mot plus
with the on / off switch
(3-1/27)
(standard setting after each
switch-on)
− Light intensity
Settings
depending on objective
(nosepiece) and technique
module (reflector turret)
− Condenser turret position
depending on objective
(nosepiece) and technique
module (reflector turret)
− Condenser front lens
depending on objective
(nosepiece)
− Aperture diaphragm
opening
depending on objective
(nosepiece)
− Transmitted-light
illumination
depending on technique
module
End
Both function modes and the programming mode are described in detail on the following pages.
B 40-075 e 02/01
OPERATION
Switching on and basic settings
Function modes
automatic
• Keep key "transmitted light
and
• Switch on the
• Set the Axioskop 2 mot plus
• Switch off the
manual
on / off" (3-14/1) pressed
Axioskop 2 mot plus with
on / off switch (3-1/27) and
wait until beep is heard
after 3 s
in the same way as the
Axioskop 2 plus
Axioskop 2 mot plus with
on / off switch (3-1/27)
Carl Zeiss
Programming mode
• Keep Set key (3-15/1) on
instrument rear pressed for
more than 2 s until double
beep is heard
− Focus positions
depending on objectives
(parfocality)
− Focusing speeds:
10 steps
•
Shortly press Set key
(3-15/1) on instrument rear
3-19