Attachment Of Adapter For The Axioskop 2 Plus - Zeiss Axioskop 2 plus Operating Manual

Axioskop 2 plus
Axioskop 2 mot plus
2.2.12 Attachment of adapter for the
Axioskop 2 plus
The adapter for the Axioskop 2 plus is used to
attach intermediate
the Axioplan 2 to the Axioskop 2 plus / Axio-
skop 2 mot plus.
• Use SW 3 ball-headed screwdriver to loosen
clamping screw (2-41/5) and remove available
tube of the Axioskop 2 plus in an upward
direction.
• Insert
dovetail of
Axioskop 2 plus (2-41/3) in the stand opening
(2-41/6) on the underside and slightly tighten
clamping screw (2-41/5).
• Insert fixation screw (2-41/2) in countersunk
hole of the adapter (2-41/3) and screw it into
the drilled hole (2-41/4) on the stand.
• Tighten clamping screw (2-41/5) and fixation
screw (2-41/2).
• Attach required intermediate tube and/or tube (2-41/1) of the Axioplan 2 to the adapter and clamp it
using screw (2-41/7) (also see the Axioplan 2 manual).
• Insert eyepieces with field number 23 into the Axioplan 2 tube (2-41/1).
B 40-075 e 10/03
Attachments and conversions
tubes and/or tubes
the adapter for
START-UP
of
the
Fig. 2-41 Attachment of adapter for the
Axioskop 2 plus
Carl Zeiss
2-27