Zeiss Axioskop 2 plus Operating Manual page 91

Axioskop 2 plus
Axioskop 2 mot plus
• Leave the programming mode by shortly pressing the Set key.
The end of the programming mode is confirmed by a beep when the Set key is released. The pilot lamp
lights up in green again.
☞
If several reflector positions are to be used, (e.g. different reflector modules for incident light or
Optovar modules for transmitted light), parfocality must be set and focusing speed matched in
the programming mode separately for each reflector position in accordance with the steps
described above.
B 40-075 e 02/01
OPERATION
Switching on and basic settings Carl Zeiss
3-23