Table of Contents
Advertisement
④ Once the download is completed, a message box (Fig. 136) will be displayed. Click "OK" .
⑤ Connect the flowmeter to the transmitter in the procedure given in "3.2 Starting LinkTop and
Connections".
3.10.2 Printing
It is possible to print a table of the transmitter's setting parameters.
① When the flowmeter is connected to the transmitter, click "File (F)" from the menu, and select "Print (P)",
and the following window (Fig. 137) will be displayed.
② By clicking "OK", the data set in the transmitter begins to be uploaded. As shown in Fig. 138, you can
confirm the status of reading process by the bar graph in the center of the message box.
Fig.136
Fig.137
Fig.138
E-025-2-E
5
Advertisement
Table of Contents
