E-025-2-E
3.6 Menu : Setup (Settings)
The "Setup" menu can be used to set flowmeter's various parameter values, transmitter's information,
and so on.
If any windows of "Diag/Service" menu is displayed on the screen, then it will not be possible to
set the various parameters, transmitter information, and so on. Close these windows before making
settings. For the actual screen, refer to Fig. 26.
Setup
Flow parameter
Field device variable
Outputs
H/L alarm
Self diag
Device information
Other
Setup Item Tree
Fig.26
Nominal diameter
Flow range
Analog output
Pulse output
Status output
Status select
Error output
Display setting
Security
Polling address