Terminating The Connection - Oval EL 2310-0BE Series Instructions Manual

⑨ When connection is complete, all functions of the menu become selectable as shown below.

3.3 Terminating the Connection

To terminate connection between the flowmeter transmitter and LinkTop, follow the procedure given
below:
① Click on "Disconnect (D) Shift + F3" as shown in Fig. 12.
Click here.
② At the message box as shown in Fig. 13, click "OK". This terminates the connection between the
flowmeter and LinkTop.
Fig.11
Fig.12
Fig.13
E-025-2-E