Table of Contents
Advertisement
3.10 Menu: File (File)
The "File" menu can be used to connect communications (refer to section "3.2 Starting LinkTop and
Connections"), to disconnect (refer to section "3.3 Terminating the Connection", and "3.4 Terminating
LinkTop), as well as to set ports, to create a flowmeter transmitter parameter database, and print
parameters. This section describes the database and printing features.
3.10.1 Database
The various parameters, transmitter information, etc., that are inputted through the "Setup" menu
(described in section 3.6) are stored in a database. This can be saved on a hard disk, flash memory,
or other types of storage medium. Setting values can also be downloaded to the flowmeter transmitter.
3.10.1.1 Opening Files
It is possible to load data from a saved file.
① Click "File (F)" from the menu, and select "Open File" from the list of "Database", then the
following dialog box (Fig. 127) will be displayed. Select the disk and folder where the relevant file
is stored and specify the file. Then click "Open (O)" .
② Data of the selected file is displayed on the print preview window of the Setting Parameter Table.
For printing, refer to "3.10.2 Printing".
Fig.127
E-025-2-E
55
Advertisement
Table of Contents
