Table of Contents
Advertisement
E-025-2-E
① Click "File (F)" from the menu, and select "Download" from the list of "Database", then the
following dialog box (Fig. 131) will be displayed. Select the disk and folder where the relevant file
is stored and specify the file. Then click "Open (O)" .
② A message box (Fig. 134) will be displayed. Click "OK" to start downloading.
When data is downloaded, various set values are changed and the output value from the flowmeter
is also changed. If valves are controlled by the output of the flowmeter, change the control loop to
manual control for the sake of safety, so that the control loop may not be affected by the output of
the flowmeter.
③ As shown in Fig. 135, you can confirm the status of downloading process by the bar graph in the
center of the message box.
5
Fig.133
Fig.134
Fig.135
Advertisement
Table of Contents
