Table of Contents
Advertisement
E-025-2-E
3.6.7.3 Polling Address (Polling address)
① Click "Setup (S)" from the menu, and select "Polling address" from the drop-down list of "Other",
then the following window (Fig. 66) will be displayed.
② Enter numeric values for the item.
Setting item
Polling address
③ Click "OK" after the setting is completed to display the message box (Fig. 67).
Click "OK" here to change the settings to the inputted values.
④ The message box (Fig. 68) is displayed after changing the setting values. Click "OK" to complete
the setting process.
⑤ The window for setting item is displayed. To exit, click "Cancel".
Polling address (Address for multi-dropping)
Default: 0
When connecting two or more flowmeters to the same
segment, assign different addresses other than"0"to
each flowmeter.
Fig.66
Detail
Fig.67
Fig.68
Setting range
0 to 63
Advertisement
Table of Contents
