E-025-2-E
⑤ Click "Connect (C) F3" under "File (F)" from the menu.
Click here.
⑥ The "Polling address" setting screen appears. The standard "Polling address" of the flowmeter is "0".
After you select "0", click "OK" to initiate the connection.
( )
If "Polling address" of the flowmeter is unknown, confirm "Polling address" by
the operation of the flowmeter. ⇨ Reference: Flowmeter Instruction Manual
(Communication Function)
⑦ A message box shown as Fig.9 appears as the connection process begins.
A bar graph in the middle of message box indicates progress of connection process.
⑧ Upon completion of connections, a message box shown as Fig. 10 appears. Click "OK" .
0
Fig.7
Fig.8
Fig.9
Fig.10