Table of Contents
Advertisement
⑨ The content of the log file when logging interval is set to "5 Seconds" is as shown in Fig. 24.
Date and time Percent flow rate
⑩ If you click the
display and data logging are terminated.
3.5.3 Write Protect (Write protect)
① Click "Process Variables (V)" on the menu and select "Write protect", then the following window
(Fig. 25) will be displayed.
"Write protect" shows whether parameter change of the transmitter is available or not.
Mode
Not write protected
Write protected
NOTE : Selecting the above mode is available by changing switches SW1-4 on the
CPU board of the flowmeter transmitter.
② To exit this procedure, click "Cancel".
button of the tool bar or "Chart and Recording" - "Active" from the menu, chart
Enables changing and setting parameters.
Disables changing and setting parameters.
(Confirmation of parameters is available.)
Flow rate
Flow velocity
Fig.24
Fig.25
Detail
E-025-2-E
SW1-4 Setting
OFF
ON
Advertisement
Table of Contents
