Table of Contents
Advertisement
E-025-2-E
3.8.1.2 Transmitter Internal Temperature Display (Xmtr temp)
① Click "Maintenance (M)" from the menu, and select "Xmtr temp" from the list of "Maintenance
xmtr", then the following window (Fig. 115) will be displayed.
② You can confirm the internal temperature of the transmitter. To exit, click "Cancel" .
3.8.1.3 Displaying Operating Time (Operating time)
① Click "Maintenance (M)" from the menu, and select "Operating time" from the list of "Maintenance
xmtr", then the following window (Fig. 116) will be displayed.
② You can confirm the total operating time up to now. To exit, click "Cancel" .
3.8.2 Maintenance Test (Maintenance test)
Input setting for simulated flow is conducted.
① Click "Maintenance (M)" from the menu, and select "Maintenance test", then the following window
(Fig. 117) will be displayed.
② Select and enter numeric values for respective items.
Setting item
Simulated input setting (Select from the right column.)
Dummy input
Flow rate
Input value for simulated flow
value
50
Detail
Inhibit
Enable
Fig.115
Fig.116
Fig.117
Inhibit, Enable
Minimum range to Maximum range
in "3.6.1.2 Setting Flow"
Setting range
Advertisement
Table of Contents
