Table of Contents
Advertisement
③ Click "OK" after the setting is completed to display the message box (Fig. 118). Click "OK" here
to change the settings to the inputted values, and to reflect the changed setting values in the
flowmeter's output. If the flowmeter's output is used to control valves or other such parts as safety
protocol, change the control loop to manual control so that the control loop cannot be influenced
by the flowmeter's output.
④ When the set value is changed, a message box (Fig. 119) will be displayed. Click "OK" to
complete the setting.
⑤ The window for setting item is displayed. To exit, click "Cancel".
3.8.3 Resetting Master (Master reset)
Current parameters are restored to the factory set values.
① Click "Maintenance (M)" from the menu, and select "Master reset", then the following window
(Fig. 120) will be displayed.
Fig.118
Fig.119
Fig.120
E-025-2-E
5
Advertisement
Table of Contents
