Table of Contents
Advertisement
E-025-2-E
3.6.5 Setting Self Diagnosis (Self diag)
① Click "Setup (S)" from the menu, and select "Self diag", then the following window (Fig. 54) will be
displayed.
② Select for respective items.
Setting item
Circuit voltage
Exciting coil/circuit Sets periodic diagnosis of coil and exciting frequency.
Measurement signal Sets periodic diagnosis of measurement signal.
Empty pipe
③ Click "OK" after the setting is completed to display the message box (Fig. 55). Click "OK" here to
change the settings to the inputted values.
④ The message box (Fig. 56) is displayed after changing the setting values. Click "OK" to complete
the setting process.
⑤ The window for setting item is displayed. To exit, click "Cancel".
0
Sets periodic monitoring of circuit voltage.
Sets periodic diagnosis of detecting empty measurement pipe. ON, OFF
Fig.54
Detail
Fig.55
Fig.56
Setting range
ON, OFF
ON, OFF
ON, OFF
Advertisement
Table of Contents
