Table of Contents
Advertisement
② Set the value of total flow at the start of measurement. If the setting is completed, click "OK" .
A message box (Fig. 108) will be displayed. By clicking "OK" again, the value is changed to the
entered set value.
③ When the set value is changed, a message box (Fig. 109) will be displayed. Click "OK" to
complete the setting.
④ The window for setting item is displayed. To exit, click "Cancel" .
3.8 Menu: Maintenance (Maintenance)
With "Maintenance (M) ", error log (occurrence/release), temperature in the transmitter, and operating
time will be displayed, and simulated output of flow, etc. and master resetting can be performed.
The actual screen is as shown in Fig. 110.
Maintenance
Fig.108
Fig.109
Maintenance xmtr
Maintenance test
Master reset
Diag/Service Item Tree
Fig.110
Error log
Xmtr temp
Operating time
E-025-2-E
Advertisement
Table of Contents
