Siemens SINUMERIK 840Di Function Manual page 125

Examples
4.1 Definition and activation of protection zones
4.1
Requirement
The following internal protection zones are to be defined for a turning machine:
• One machine- and workpiecerelated protection zone for the spindle chuck, without
• One channelspecific protection zone for the workpiece, without limitation in the third
• One channelspecific, toolrelated protection zone for the toolholder, without limitation in
The workpiece zero is placed on the machine zero to define the protection zone for the
workpiece.
When activated, the protection zone is then offset by 100mm in the Z axis in the positive
direction.
Axis Monitoring, Protection Zones (A3)
Function Manual, 08/2005 Edition, 6FC5397-0BP10-0BA0
limitation in the third dimension
dimension
the third dimension
4
4-1