Siemens SINUMERIK 840Di Function Manual page 129

$SN_PA_CENT_ORD[0.
4]
$SN_PA_CENT_ORD[0.
5]
$SN_PA_CENT_ORD[0.
6]
$SN_PA_CENT_ORD[0.
7]
$SN_PA_CENT_ORD[0.
8]
$SN_PA_CENT_ORD[0.
9]
$SN_PA_CENT_ABS[0,
0]
$SN_PA_CENT_ABS[0.
1]
$SN_PA_CENT_ABS[0.
2]
$SN_PA_CENT_ABS[0.
3]
$SN_PA_CENT_ABS[0.
4]
$SN_PA_CENT_ABS[0.
5]
$SN_PA_CENT_ABS[0.
6]
$SN_PA_CENT_ABS[0.
7]
$SN_PA_CENT_ABS[0.
8]
$SN_PA_CENT_ABS[0.
9]
Table 4-3
System variable
$SN_PA_ACTIV_IMMED
[0]
$SN_PA_ACTIV_IMMED
[1]
$SC_PA_TW[0]
$SC_PA_TW[1]
$SC_PA_ORI[0]
$SC_PA_ORI[1]
$SC_PA_LIM_3DIM[0]
Axis Monitoring, Protection Zones (A3)
Function Manual, 08/2005 Edition, 6FC5397-0BP10-0BA0
0 ; Midpoint of contour[i], ordinate value
; Protection zone for spindle chuck, contour element 4
0 ; Midpoint of contour[i], ordinate value
; Protection zone for spindle chuck, contour element 5
0 ; Midpoint of contour[i], ordinate value
; Protection zone for spindle chuck, contour element 6
0 ; Midpoint of contour[i], ordinate value
; Protection zone for spindle chuck, contour element 7
0 ; Midpoint of contour[i], ordinate value
; Protection zone for spindle chuck, contour element 8
0 ; Midpoint of contour[i], ordinate value
; Protection zone for spindle chuck, contour element 9
0 ; Midpoint of contour[i], abscissa value
; Protection zone for spindle chuck, contour element 0
0 ; Midpoint of contour[i], abscissa value
; Protection zone for spindle chuck, contour element 1
0 ; Midpoint of contour[i], abscissa value
; Protection zone for spindle chuck, contour element 2
0 ; Midpoint of contour[i], abscissa value
; Protection zone for spindle chuck, contour element 3
0 ; Midpoint of contour[i], abscissa value
; Protection zone for spindle chuck, contour element 4
0 ; Midpoint of contour[i], abscissa value
; Protection zone for spindle chuck, contour element 5
0 ; Midpoint of contour[i], abscissa value
; Protection zone for spindle chuck, contour element 6
0 ; Midpoint of contour[i], abscissa value
; Protection zone for spindle chuck, contour element 7
0 ; Midpoint of contour[i], abscissa value
; Protection zone for spindle chuck, contour element 8
0 ; Midpoint of contour[i], abscissa value
; Protection zone for spindle chuck, contour element 9
Protection zone: Workpiece and tool holder
Value Comment
0 ; Protection zone for workpiece not immediately active
0 ; Protection zone for tool holder not immediately active
" " ; Protection zone for workpiece, channel-specific
'H01' ; Protection zone for toolholder, channel-specific
1 ; Orientation of the protection zone: 1= 3. and first geometry axis
; Protection zone for workpiece
1 ; Orientation of the protection zone: 1= 3. and first geometry axis
; Protection zone for tool holder
0 ; Type of limitation in the third dimension: 0 = no limitation
; Protection zone for workpiece tool holder 0
4.1 Definition and activation of protection zones
Examples
4-5