Siemens SINUMERIK 840Di Function Manual page 1766

Detailed Description
2.5 Toolholder with orientation capability
System variables for the user and for fine offsets
• $TC_CARR34 to $TC_CARR40
• $TC_CARR41 to $TC_CARR65
• $TC_CARR47 to $TC_CARR54 and $TC_CARR61 to $TC_CARR63
Description
Toolholder name *
Axis name 1 **
Axis name 2 **
Identifier **
Position component X **
Position component Y **
Position component Z **
x comp. fine offset of offset vector l
y comp. fine offset of offset vector l
z comp. fine offset of offset vector l
x comp. fine offset of offset vector l
y comp. fine offset of offset vector l
z comp. fine offset of offset vector l
x comp. fine offset of offset vector l
y comp. fine offset of offset vector l
z comp. fine offset of offset vector l
x comp. fine offset of offset vector l
y comp. fine offset of offset vector l
z comp. fine offset of offset vector l
Offset of fine offset of rotary axis v
Offset of fine offset of rotary axis v
Remarks:
*
**
2-86
Contain parameters, which are freely available to the user.
Contain fine offset parameters that can be added to the values in the basic parameters.
The fine offset value assigned to a basic parameter is obtained when the value 40 is
added to the parameter number.
Not defined and produce an alarm if read or write access is attempted.
A toolholder with orientation capability cannot subsequently be assigned a number with system
variable $TC_CARR34, only a name.
System variables $TC_CARR35 to $TC_CARR40 refer to the intended use of the toolholder with
orientation capability within the measuring cycles and can also be used for other purposes.
NCK variables
$TC_CARR34
$TC_CARR35
$TC_CARR36
$TC_CARR37
$TC_CARR38
$TC_CARR39
$TC_CARR40
$TC_CARR41
1
$TC_CARR42
1
$TC_CARR43
1
$TC_CARR44
2
$TC_CARR45
2
$TC_CARR46
2
$TC_CARR55
3
$TC_CARR56
3
$TC_CARR57
3
$TC_CARR58
4
$TC_CARR59
4
$TC_CARR60
4
$TC_CARR64
1
$TC_CARR65
2
Function Manual, 08/2005 Edition, 6FC5397-0BP10-0BA0
Language Preassignment
format
String[32] ""
String[32] ""
String[32] ""
INT 0
REAL 0
REAL 0
REAL 0
REAL 0
REAL 0
REAL 0
REAL 0
REAL 0
REAL 0
REAL 0
REAL 0
REAL 0
REAL 0
REAL 0
REAL 0
REAL 0
REAL 0
Tool Compensation (W1)