Completion Using Standalone-Lite Mode; Completion Using The Roc Number - Westpac EFTPOS 1i User Manual

6.14 Completion using Standalone-Lite Mode.

Completion using the ROC number.

Terminal Screen
< READY
PRE AUTH
COMPLETION
SETTLEMENT
PREV
ENTER ROC NO
COMPLETION $X.XX
AUTH..XXXX
COMPLETION
AMOUNT
OR ENTER
$X.XX
COMPLETION $X.XX
COMPLETION
APPROVED
Before completing the transaction, check that the transaction was approved before
handing the customer their copy of the transaction record and their card. If the
transaction is declined, the terminal will display an error message giving the reason.
76
Next Step
Select COMPLETION on the terminal. Press ENTER on the
keypad and Next on the screen to locate COMPLETION.
>
NEXT
Enter the ROC of the pre-authorisation. If the ROC cannot
be found, the terminal will prompt for the ROC to be
re-entered. If this secondary ROC entry is not successful
then the lookup can be performed using the Auth Number.
If the lookup is successful then the pre-authorised details
will be shown (last four digits of card number, amount).
Press ENTER to confirm the amount or enter a revised
amount and press ENTER.
Take note of the response message. A successful response
will display "APPROVED", while an unsuccessful response
will display "DECLINED".
WESTPAC EFTPOS 1i TERMINAL USER GUIDE