Completion Using The Authorisation Number - Westpac EFTPOS 1i User Manual

Completion using the authorisation number.

Terminal Screen
HH:MM DD/MM/YY
< READY
ENTER ROC NO
ON POS
ENTER AUTH NO
ON POS
VERIFY CHECK-OUT
CORRECT?
COMPLETION
Swipe or
Insert Card
44
Next Step
Start by initiating the transaction via the POS interface,
including entry of the completion amount. The POS will
then prompt for the ROC to be entered.
>
Enter ZERO (0) on the POS.
The terminal will then prompt for the Auth Number to
be entered.
Enter the authorisation number on the POS.
If the lookup is successful then the pre-authorised details
will be shown (last four digits of card number, amount,
completion amount).
Confirm via the POS whether the authorisation details
shown are correct.
If NO is selected, the terminal will prompt for ROC re-entry.
If YES is selected, the completion will continue as expected.
If lookup is NOT successful, then physically present the
$X.XX
card to the terminal by swiping or inserting to continue with
the completion.
Otherwise select Cancel to return to idle screen.
WESTPAC EFTPOS 1i TERMINAL USER GUIDE