Pre-Authorisation Re-Authorisation Using Standalone-Lite Mode - Westpac EFTPOS 1i User Manual

6.10 Pre-Authorisation Re-Authorisation using
Standalone-Lite Mode.
Terminal Screen
< READY
PRE AUTH
COMPLETION
SETTLEMENT
PREV
< READY
PA REAUTH
PA RE-SUB
PA NOSHOW
PREV
PA REAUTH
ENTER AMOUNT
$0.00
PA REAUTH
ENTER ROC NO
68
Next Step
Select the PRE AUTH menu on the terminal. Press ENTER
on the keypad and Next on the screen to locate the
>
PRE AUTH menu.
NEXT
Select PA REAUTH on the terminal. Press Next on the screen
to locate PA REAUTH.
>
NEXT
Enter the re-authorisation amount into the terminal and
press ENTER.
Enter the ROC of the pre-authorisation. If the ROC cannot
be found, the terminal will prompt for the ROC to be
re-entered. If this secondary ROC entry is not successful
then the lookup can be performed using the Auth Number.
WESTPAC EFTPOS 1i TERMINAL USER GUIDE