6.8 Pre-Authorisation Partial Cancel using
Standalone-Lite Mode.
Terminal Screen
<
READY
PRE AUTH
COMPLETION
SETTLEMENT
PREV
<
READY
PRE AUTH
PA TOP-UP
PART CANCEL
PREV
PART CANCEL
ENTER AMOUNT
$0.00
PART CANCEL
ENTER ROC NO
64
Next Step
Select the PRE AUTH menu on the terminal. Press ENTER
on the keypad and Next on the screen to locate the
>
PRE AUTH menu.
NEXT
Select PART CANCEL on the terminal. If required, press
Next on the screen to locate PART CANCEL.
>
NEXT
Enter the partial cancellation amount into the terminal and
press ENTER.
Enter the ROC of the pre-authorisation. If the ROC cannot
be found, the terminal will prompt for the ROC to be
re-entered. If this secondary ROC entry is not successful
then the lookup can be performed using the Auth Number.
WESTPAC EFTPOS 1i TERMINAL USER GUIDE