6.12 Pre-Authorisation No Show using
Standalone-Lite Mode.
Terminal Screen
<
READY
PRE AUTH
COMPLETION
SETTLEMENT
PREV
<
READY
PA REAUTH
PA RE-SUB
PA NOSHOW
PREV
PA NOSHOW
ENTER AMOUNT
$0.00
PA NOSHOW
ENTER ROC NO
72
Next Step
Select the PRE AUTH menu on the terminal. Press ENTER
on the keypad and Next on the screen to locate the
>
PRE AUTH menu.
NEXT
Select PA NOSHOW on the terminal. Press Next on the
screen to locate PA NOSHOW.
>
NEXT
Enter the no show amount into the terminal and press
ENTER.
Enter the ROC of the pre-authorisation. If the ROC cannot
be found, the terminal will prompt for the ROC to be
re-entered. If this secondary ROC entry is not successful
then the lookup can be performed using the Auth Number.
WESTPAC EFTPOS 1i TERMINAL USER GUIDE