Connectivity - Network & Pairing; Connecting Your Presto Smart E355 To Your Point Of Sale (Pos) System; Processing Transactions - Integrated Mode; Processing A Purchase - Westpac PRESTO SMART e355 Quick Reference Manual

Connectivity – network & pairing
Connecting your Presto Smart e355 to your
Point of Sale (POS) system.
1. The technician will connect your new terminal to your local network
(the same network your POS is on) via Wi-Fi. Alternatively, you can connect
your new terminal to your local network by following the steps in the
'Presto Smart e355 User Guide', available on westpac.com.au/prestosupport
2. Follow the steps outlined in your POS Pairing Guide and configure your POS
to pair with your Presto Smart e355 terminal.
You can find a step-by-step guide to pairing at
westpac.com.au/prestosupport or by contacting your POS Provider.
3. Once paired successfully, your terminal will display 'Connected.'
Processing transactions – integrated mode

Processing a purchase.

1. Initiate a 'Purchase' transaction via the POS.
2. The terminal will prompt you to Tap, Insert or Swipe the customer's card.
3. If a contactless card is presented, position the card above the terminal
screen for processing.
4. The terminal will advise if the transaction has been approved or declined.
5. Alternatively, for Insert or Swipe card processing, select the account type on
the terminal.
6. The terminal will prompt the customer to enter their PIN (if required) and
then press the
7. The terminal will advise if the purchase has been approved or declined.
key.
5