Pre-Authorisation Top-Up Using Standalone-Lite Mode - Westpac EFTPOS 1i User Manual

6.6 Pre-Authorisation Top-Up using
Standalone-Lite Mode.
Terminal Screen
< READY
PRE AUTH
COMPLETION
SETTLEMENT
PREV
< READY
PRE AUTH
PA TOP-UP
PART CANCEL
PREV
PA TOP-UP
ENTER AMOUNT
$0.00
PA TOP-UP
ENTER ROC NO
60
Next Step
Select the PRE AUTH menu on the terminal. Press ENTER
on the keypad and Next on the screen to locate the
>
PRE AUTH menu.
NEXT
Select PA TOP-UP on the terminal. If required, press Next on
the screen to locate PA TOP-UP.
>
NEXT
Enter the top-up amount into the terminal and press ENTER.
Enter the ROC of the pre-authorisation. If the ROC cannot
be found, the terminal will prompt for the ROC to be
re-entered. If this secondary ROC entry is not successful
then the lookup can be performed using the Auth Number.
WESTPAC EFTPOS 1i TERMINAL USER GUIDE