Pre-Authorisation Re-Submission Using Standalone-Lite Mode - Westpac EFTPOS 1i User Manual

6.11 Pre-Authorisation Re-Submission using
Standalone-Lite Mode.
Terminal Screen
< READY
PRE AUTH
COMPLETION
SETTLEMENT
PREV
< READY
PA REAUTH
PA RE-SUB
PA NOSHOW
PREV
PA RE-SUB
ENTER AMOUNT
$0.00
PA RE-SUB
ENTER ROC NO
AUTH..XXXX $X.XX
AUTH NO XXXXXX
CONFIRM?
70
Next Step
Select the PRE AUTH menu on the terminal. Press ENTER
on the keypad and Next on the screen to locate the
>
PRE AUTH menu.
NEXT
Select PA RE-SUB on the terminal. Press Next on the screen
to locate PA RE-SUB.
>
NEXT
Enter the re-submission amount into the terminal and
press ENTER.
Enter the ROC of the pre-authorisation. If the ROC cannot
be found, the terminal will prompt for the ROC to be
re-entered. If this secondary ROC entry is not successful
then the lookup can be performed using the Auth Number.
If the lookup is successful then the pre-authorised details
will be shown (last four digits of card number, amount,
authorisation number).
Press ENTER to confirm whether the authorisation details
shown are correct.
WESTPAC EFTPOS 1i TERMINAL USER GUIDE