Table of Contents
Advertisement
2.3 Powering up.
Connecting base station to power.
1. Insert the power cable into the power
port on the terminal base.
2. Plug the AC power cord into a wall
outlet or a power board.
3. Place terminal on charger to begin
charging the terminal.
Manual start-up.
Hold the green (Enter) key down for about 10 seconds until terminal displays the start-
up screen.
Manual shutdown.
Hold the red (Cancel) key down for about 10 seconds until the terminal displays the
shutdown verification screen. Keep holding the red key until the terminal shuts down.
(Must be unplugged from power supply before attempting manual shut down)
2.4 Loading paper.
1. On top of your terminal, lift and open the black paper compartment latch.
2. Position the paper roll with the end of the roll protruding from underneath the roll
towards the terminal screen.
3. Pull paper out slightly and close the cover.
2.5 Getting started.
Your EFTPOS 1i terminal arrives as a complete unit. Included in your delivery is:
•
quick reference guide
•
terminal
•
terminal base
•
paper rolls
•
power supply
•
cables (RS232 serial, USB and dial cables).
For any PC-EFTPOS software queries, please contact the PC-EFTPOS Help Desk on
02 9998 9800.
4
WESTPAC EFTPOS 1i TERMINAL USER GUIDE
Advertisement
Table of Contents
