Completion Using The Authorisation Number - Westpac EFTPOS 1i User Manual

Completion using the authorisation number.

Terminal Screen
< READY >
PRE AUTH
COMPLETION
SETTLEMENT
PREV NEXT
ENTER ROC NO
ENTER AUTH NO
COMPLETION $X.XX
AUTH..XXXX
COMPLETION
AMOUNT
OR ENTER
COMPLETION
COMPLETION
AMOUNT
$X.XX
WESTPAC EFTPOS 1i TERMINAL USER GUIDE
Next Step
Select COMPLETION on the terminal. Press ENTER on the
keypad and Next on the screen to locate COMPLETION.
Enter ZERO (0) on the terminal and press ENTER.
The terminal will then prompt for the Auth Number
to be entered.
Enter the Auth Number and press ENTER.
If the lookup is successful then the pre-authorised details
will be shown (last four digits of card number, amount).
Press ENTER to confirm the amount or enter a revised
amount and press ENTER.
The completion will continue as expected; refer to the final
Approved/Declined screen below.
If lookup is NOT successful, enter the completion amount
and press ENTER.
77