Appendix B Headset Operation; Attaching The Headset - NEC DT830 Series User Manual

APPENDIX B

ATTACHING THE HEADSET

Note: The Headset key must be programmed in
advance. For the programming of the Headset
key, contact the system administrator.
Connect the headset to HEADSET connector on the
back of the telephone following the procedure below.
Note: The headset which can be connected to the tele-
phone is "HW251N-A10/WT100-EHS-NE/Voy-
ager Legend CS (manufactured by Plantronics)".
HEADSET OPERATION
252
• TO CONNECT THE HEADSET
STEP 1: Insert the modular plug into the HEADSET
connector on the back of the telephone until it
clicks.
STEP 2: Place the headset cord into the groove as
shown in the figure below, and fix it.
Telephone
Modular Plug
Note:
To make a call with the headset, see
INPUT CHARACTERS.
HEADSET Connector
Groove
Code
HOW TO