NEC DT830 Series User Manual page 56

0
STEP 5: Select Automatic,
able (see the following table).
Select an item by either of the following operations.
• Highlight an item by using
key, and then press
0 2
• Press -
soft key.
[RTP Alarm]
0
Automatic
1
Disable
Enable
2
No. Menu Items
Follow the setting on the System.
If no setting is made in the Sys-
0 Automatic
tem, the default setting
(Alarm=ON) is applied.
Follow the setting on the terminal
1 Disable
(OFF).
Follow the setting on the terminal
2 Enable
(ON).
Note:
For the setting on the System, contact the Sys-
tem administrator.
Note:
The enabled item is highlighted.
1
Disable or
or the UP/DOWN soft
or the OK soft key.
key, and then press or the OK
Back
OK
Descriptions
2 • TO ENABLE/DISABLE DTMF TONE
En-
The procedure below shows how to enable/disable
DTMF Tone.
STEP 1: Display the Menu screen, and select Setting.
STEP 2: Select
Select an item by either of the following operations.
• Highlight an item by using
• Press
STEP 3: Select
Select an item by either of the following operations.
• Highlight an item by using
• Press
47
1
User Setting.
key, and then press ,
1
key.
[Setting]
1
User Setting
2
Download
Data Backup/Restore
3

Menu
2
Talk.
key, and then press ,
2
key.
or the UP/DOWN soft
or the OK soft key.
OK
or the UP/DOWN soft
or the OK soft key.