NEC DT830 Series User Manual page 16

1.
(7) Recall
Press this key to finish the call and hear the dial
tone.
(8) Feature
Used to activate any features as terminal setup
functions (see FUNCTION KEY
to program One-Touch Speed Dial Keys.
(9) Answer
When LED on this key is lit, press this key to
answer a waiting call.
(10) Mic
Press this key to respond hands-free. LED on this
key lights during speaker phone operation.
(11) Menu
To access the local menus of DT830 Series, such
as Call History, Directory or Terminal Setting.
(12) Cursor
By using this key, the terminal user can access to
various features with a simple operation.
Also, this key is used as a cursor-movement key
on the Menu screen.
Move the highlighted area one line up
Up
the screen.
Move the highlighted area one line
Down
down the screen.
Left Go back to the previous screen.
ACTIVITIES), and
7
Go to the screen which corresponds to
Right
the highlighted menu item.
Go to the screen which corresponds to
Enter
the highlighted menu item.
Details on Cursor key
(a) Volume (UP) key
(4-way Scroll UP key)
(b)
Redial key
(4-way Scroll LEFT key)
(a) UP/DOWN
Used to adjust LCD contrast, speaker/receiver vol-
ume, and ringer volume.
• LCD Contrast:
Press the UP/DOWN key while an idle
state.
• Speaker/Receiver Volume:
Press the UP/DOWN key during a conver-
sation.
• Ringer Volume:
Press the UP/DOWN key while a terminal
is ringing.
(b) Redial
(Last Number Call, Speed Calling-Station/Group)
Press the key to activate redial feature. Press the
Redial key and scroll back through numbers that
have been dialed. When the desired number is
displayed, press the
(d)
Enter Key
(c)
Directory key
(4-way Scroll RIGHT key)
(a)
Volume (DOWN) key
(4-way Scroll DOWN key)
or # key to activate dialing.