NEC DT830 Series User Manual page 86

[Setting]
1
User Setting
2 Download
3 Data Backup/Restore
4
STEP 4: Select Protocol.
Select an item by either of the following operations.
• Highlight an item by using
key, and then press
4
• Press key.
[Backup/Restore]
1
Data Backup
2 Data Restore
3
Server Address
4
Protocol
5
FTP Settings

STEP 5: Select a protocol used by the destination
server.
Select an item by either of the following operations.
• Highlight an item by using
key, and then press
1 2
• Press or
soft key.
Menu OK
or the UP/DOWN soft
, or the OK soft key.
Back OK
or the UP/DOWN soft
or the OK soft key.
key, and then press or the OK
[Protocol]
1
FTP
2
TFTP
STEP 6: The display goes back to the Backup/Re-
store screen.
1
When
7.
2
When
15.
5
STEP 7: Select
Select an item by either of the following operations.
• Highlight an item by using
key, and then press
5
• Press
[Backup/Restore]
1
Data Backup
2 Data Restore
3
Server Address
4
Protocol
5
FTP Settings
77

Back
OK
FTP is selected here, go to STEP
TFTP is selected here, go to STEP
FTP Settings.
or the UP/DOWN soft
, or the OK soft key.
key.
Back OK