NEC DT830 Series User Manual page 49

1
STEP 3: Select Incoming Call.
Select an item by either of the following operations.
• Highlight an item by using
key, and then press
• Press 1 key.
[User Setting]
1
Incoming Call
Talk
2
3
Display
4 Change Password
5 Security
6
Peripherals
Usability
7

3
STEP 4: Select Headset Ring.
Select an item by either of the following operations.
• Highlight an item by using
key, and then press
3
• Press key.
or the UP/DOWN soft
, or the OK soft key.
Back OK
or the UP/DOWN soft
, or the OK soft key.
[Incoming Call]
1
Ring Volume
2
Offhook Ring
3
Headset Ring
4 Ring Tone
5 Illumination
6
Headset Ring Volume
STEP 5: To disable/enable the ringing of headset, se-
1
lect Disable or
Select an item by one of the following operations.
• Highlight an item by using
key, and then press
1
• Press
soft key.
[Headset Ring]
Disable
1
2 Enable
Note:
Default setting is
Note:
The enabled item is highlighted.
40

Back OK
2
Enable.
or the UP/DOWN soft
or the OK soft key.
2
or key, and then press

Back OK
1 Disable.
or the OK