NEC DT830 Series User Manual page 29

1.
Release/RLS (Release Key)
Allows you to release the current call when using the
headset, without waiting for the party to hang up.
Signal/SIG (Manual Signaling)
Permits station users to send a one-second ring to a
predetermined station. If the signaled station is ringing
from another call, the manual intercom signal will
interrupt that ringing.
CallKeep/CKEEP (Eight-Party Conference Retrain)
Allows all outside parties to stay on a conference when
all internal parties hang up.
Serial/SCALL (Serial Call)
Allows you to set Serial Call for the caller before
extending the call, allowing the caller to receive an
announcement at the end of the call guiding the caller
to dial the next number and subsequent numbers.
IZPaging/IZP (Internal Zone Paging)
Allows a user to make a voice call through the speakers
of the designated group.
IDChange/IDCHG (Call ID Change Display)
Allows you to toggle between standard display and an
alternate display.
G-PickUp/GPICK (Call Pickup - Group
Enhancement)
Allows you to answer any ringing station within your
expanded call pickup group.
CH Conf./CHCNF (Call Hold - Conference)
Allows a station user to establish a conference
connection by adding a third party, who is held on
another line, to the existing two-party connection.
Visitor/VISIT (Survivable Remote MGC)
Allows a station to indicate a status: when a user is in
remote office, VISIT will be blinking. After recovering
the main office, VISIT will return to light.
RingMute/RMUTE (Ringer Mute)
Allows a station user to mute or recover station ringing.
Reverse/RVERS:
Allows you to reverse the black and white in its display:
background, characters, and icons.
1:25 PM
Mic NoDist
1:25 PM
Mic NoDist Reverse
Note: Not available for DT410 Series.
SPD Set/SPDSET (One-Touch Speed Calling)
Allows you to add, edit, or delete the One-Touch Speed
Calling key.
>>> (Display Function Next Page)
Allows you to scroll to the next screen.
<<< (Display Function Previous Page)
Allows you to scroll to the previous screen.
20
MON 11 MAY 2015
Reverse >>>
MON 11 MAY 2015
>>>