Boss/Secretary - Mw Lamp Control - NEC DT830 Series User Manual

BOSS/SECRETARY - MW LAMP
CONTROL
DT830 DT430/410
To Set MW at Boss's Station
Pattern1:
STEP 1: Lift the handset or press
STEP 2: Press the boss' ringing line. Ask the calling
party to hold.
STEP 3: Press the MSG Wait line/feature key. No ser-
vice set tone is heard.
MSG Wait
1:25 PM
Boss sees the MW on display and can call secretary to
receive message.
Pattern2:
STEP 1: After taking message, press
receive dial tone.
STEP 2: Press the MSG Wait line/feature key. Re-
ceive a service set tone.
MSG Wait
1:25 PM
Speaker
key.
MON 11 MAY 2015
Recall
MON 11 MAY 2015
Note:
To Cancel At Boss's Station
Pattern1:
STEP 1: Lift the handset or press
STEP 2: Press the Boss's line appearance.
STEP 3: Press the MW-CANCEL line/feature key. Re-
Pattern2:
STEP 1: While engaged in conversation on boss' mul-
key and
158
The secretary can hang up after taking a mes-
sage, and set a message lamp at any time by
going off-hook on the boss' multiline and press-
ing the MSG Wait key.
a dial tone.
ceive a service set tone.
MW
1:25 PM MON 11 MAY 2015
tiline, press the MW-CANCEL key. No ser-
vice set tone is heard.
MW
1:25 PM MON 11 MAY 2015
Speaker
key. Receive
CANCEL
CANCEL