To Make An Internal Call - NEC DT830 Series User Manual

TO MAKE AN INTERNAL CALL

DT830 DT430/410
When a dialed station number is registered in Personal
Directory, the corresponding name information is dis-
played on the LCD of DT830 Series while you are
hearing a ringback tone or are engaged in a conversa-
tion. According to the initial settings, the display may
differ from the following examples. For more informa-
tion, contact the system administrator.
Note:
Personal Directory Name Display function is
available only for DT830 Series.
Note:
Here describes the Normal Dial Mode. About the
other mode, see
SELECTIVE DIALING (DYNAMIC DIAL PAD, PRE-
SET DIAL) in chapter 5.
STEP 1: Lift the handset or press
a dial tone.
Blink My Line Information
(Name and Station Number)
Ken Kobus
1:25 PM
Mic NoDist
STEP 2: Dial the desired station number. Display indi-
cates digits dialed.
(while hearing a ringback tone)
• When the dialed station number is registered in Personal
Directory
TO ORIGINATE A CALL USING
Speaker
key, receive
31313
MON 11 MAY 2015
>>>
Name Information registered
in Personal Directory
MARY HARRIS
Mic
• When the dialed station number is not registered in Per-
sonal Directory
1:25 PM
Mic
STEP 3: Use the handset or Mic to start a conversa-
tion.
(while in a conversation)
• When the dialed station number is registered in Personal
Directory
Name Information
registered in
Personal Directory
MARY HARRIS
Mic
96
Dialed Station Number
31314
>>>
Dialed Station Number
31314
MON 11 MAY 2015
>>>
Dialed Station Number
31314
NoDist >>>