NEC DT830 Series User Manual page 90

STEP 20:After the data backup is complete, the display
changes as follows:
Upload Complete!
The display goes back to the Backup/
Restore screen with the Exit soft key.
Note:
When the data backup ends in failure, "Upload
Failed!" is displayed on the LCD. Check to see
the following and then make a retry.
Check Points
A different file name is
specified between
DT830 Series and FTP/
TFTP server.
Incorrect IP address of
FTP/TFTP server has
been entered from the
telephone.
The power to FTP/
TFTP server or network
equipment is OFF.
LAN cable is
disconnected.
Exit
Actions
Set the same file name
from both DT830 Series
and FTP/TFTP server.
Set the proper IP address
of FTP/TFTP server.
Turn on the power.
Reconnect the cable
securely.
• TO RESTORE PERSONAL SETTINGS
The DT830 Series user can restore the personal
settings of the terminal. To download the backup file to
the telephone, the terminal needs to be connected to
FTP/TFTP server.
Note: For details on the FTP/TFTP service, contact the
System administrator.
Before starting the download, the IP Address of the
FTP/TFTP server must be entered from the terminal.
STEP 1: Set up the FTP/TFTP server.
<FTP server>
Put the backup file you want to restore into
the designated directory (for Windows IIS,
the default is "C:\InetPub\ftproot") of the FTP
server.
<TFTP server>
Put the backup file you want to restore into a
desired directory of the TFTP server and
then specify it as the directory for download-
ing.
STEP 2: Display the Menu screen, and select Setting.
81