NEC DT830 Series User Manual page 94

3
STEP 15:Select Server Address.
Select an item by either of the following operations.
• Highlight an item by using
key, and then press
• Press 3 key.
[Backup/Restore]
1
Data Backup
Data Restore
2
3 Server Address
4 Protocol
5
FTP Settings

STEP 16:Enter the IP address of the FTP/TFTP server
which stores the backup file. For example, to
set the IP address of 10.41.208.205, enter
10*41*208*205 [separate with an asterisk
(*)].
[Server Address]
'*'For'.'
.
BK
After entering the IP address, press
the OK soft key.
STEP 17:The display goes back to the Backup/Re-
or the UP/DOWN soft
, or the OK soft key.
Back OK
1
. .
Back OK
or
store screen. Select
Select an item by either of the following operations.
• Highlight an item by using
key, and then press
• Press 2
[Backup/Restore]
Data Backup
1
Data Restore
2
3
Server Address
4 Protocol
5
FTP Settings
STEP 18:The default file name will be displayed as fol-
lows:
[Data Restore]
Input a folder name.
PersonalData.tgz
BK
Note: Do not change the extension (.tgz) of the backup
file. If the extension is changed, the file cannot be
restored properly.
Note:
When changing the default file name, press the
BK soft key once to delete the default file name
and then enter a new file name by using the digits
keys.
85
2
Data Restore.
or the UP/DOWN soft
, or the OK soft key.
key.

Back OK
A
Enc
Cancel Exec