Soft Keys - NEC DT830 Series User Manual

1.

SOFT KEYS

The Soft Keys provide a set of functions on the LCD
that adapt to the changing state of the telephone. While
default soft key settings are provided, desired functions
can be assigned to individual stations as required. The
soft keys, at the bottom of the LCD, can display the
names of available functions, names of user-assigned
functions and names of functions assigned by a
specific soft key pattern. Displayed soft keys can vary,
depending on the state of the phone and/or when the
Next/Previous key is pressed.
7:35 AM MON 11 MAY 2015
Mic NoDist
Exit
Note: For DT830 Series, eight digits characters are dis-
played on the LCD. For other terminals, the soft
key indication characters are displayed as six
digits without a frame. For the details, contact the
system administrator.
Note:
The soft key function is available for the terminals
with LCD.
Default Displays for Each Status
Different patterns of soft key settings can be registered
for individual call status and assigned to individual
terminals as required.
Default soft key settings are provided corresponding to
particular functions. Different soft key settings are
displayed at the bottom of the LCD depending on the
status, as follows:
4051
>>>
Help
17
IDLE
4:26 PM MON 11 MAY 2015
Mic NoDist
DIAL TONE/DIALING
(1) 4:26 PM MON 11 MAY 2015
Mic PickUp
Push >>>
(2)
4:26 PM MON 11 MAY 2015
CF-Busy
CF-NoAns
RINGING
4:26 PM MON 11 MAY 2015
Mic Voice
>>>
CF-All >>>
>>>
>>>