NEC DT830 Series User Manual page 57

[User Setting]
Incoming Call
1
2 Talk
3
Display
4
Change Password
5 Security
6 Peripherals
Usability
7

2
STEP 4: Select DTMF Tone.
Select an item by either of the following operations.
• Highlight an item by using
key, and then press
2
• Press key.
[Talk]
1 RTP Alarm
2
DTMF Tone
Key Touch Tone
3
4 Hold Music
5
Prefix

Back OK
or the UP/DOWN soft
, or the OK soft key.
Back OK
0
STEP 5: Select
able (see the following table).
Select an item by either of the following operations.
• Highlight an item by using
key, and then press
0
• Press
soft key.
[DTMF Tone]
0
Automatic
1
Disable
Enable
2
No. Menu Items
0 Automatic
1 Disable
2 Enable
Note:
For the setting on the System, contact the Sys-
tem administrator.
Note:
The enabled item is highlighted.
48
1
Automatic, Disable or
or the UP/DOWN soft
or the OK soft key.
2
- key, and then press
Back
OK
Descriptions
Follow the setting on the Sys-
tem. If no setting is made in
the System, the default setting
(DTMF=ON) is applied.
Follow the setting on the termi-
nal (OFF).
Follow the setting on the termi-
nal (ON).
2
En-
or the OK