To Make An External Call - NEC DT830 Series User Manual

To Switch the Line Indicating Double Height
Characters
By pressing the soft key or the Line/Feature key, you
can switch the characters displayed to double height
size in the order of "Enlarged Characters (2nd line)" →
"Enlarged Characters (3rd line)" → "No Enlarged
Characters".
The following shows an example when using this fea-
ture.
• No Enlarged Characters
7:25 AM MON 11 MAY 2015
Mic NoDist
• Enlarged Characters (2nd line)
7:25 AM MON 11 MAY 2015
Mic NoDist
• Enlarged Characters (3rd line)
7:25 AM MON 11 MAY 2015
Mic NoDist
31313
>>>
31313
>>>
31313
>>>
94

TO MAKE AN EXTERNAL CALL

DT830 DT430/410
When a dialed telephone number is registered in Per-
sonal Directory, the corresponding name information
will be displayed on LCD of DT830 Series while you
are hearing a ringback tone or are engaged in a con-
versation. According to the initial settings, the display
may differ from the following examples. For more infor-
mation, contact the system administrator.
Note:
Personal Directory Name Display function is
available only for DT830 Series.
Note:
Here describes the Normal Dial Mode. Regarding
the other mode, see
USING SELECTIVE DIALING (DYNAMIC DIAL
PAD, PRESET DIAL)
STEP 1: Lift the handset or press
a dial tone.
My Line Information (Name and Station Number)
Ken Kobus
1:25 PM
Mic NoDist
STEP 2: Dial the Central Office access code, e.g. 9.
1:25 PM
Mic PickUp
TO ORIGINATE A CALL
in Chapter 5.
Speaker
key, receive
31313
MON 11 MAY 2015
>>>
Dialed Code
9
MON 11 MAY 2015
CF-All >>>