Voice Call - NEC DT830 Series User Manual

STEP 5: Dial the desired number.
STEP 6: If an "Authorization Code" is required, the
caller hears a special dial tone.
STEP 7: Enter "Authorization Code", or call will be de-
nied.
Note:
This option is available only if system is pro-
grammed with Least Cost Routing.
To Enter With Account Code (see above)
Service set tone is optional depending upon system
programming.
Note: If a 4, 8, 16 or 32-button display terminal is used,
the display indicates all of the digits dialed.

VOICE CALL

DT830 DT430/410
STEP 1: Lift the handset.
STEP 2: Dial the desired station number.
STEP 3: Press the Voice key.
VOICE
1:25 PM
STEP 4: Speak to called party.
2000
MON 11 MAY 2015
Using Soft Key
STEP 1: Lift the handset.
STEP 2: Dial the desired station number; the VOICE
soft key appears while the station is ringing.
1:25 PM
Mic
STEP 3: Press the VOICE soft key and speak to called
party.
Note:
A Voice Call may be programmed on a One-
Touch Speed Calling key by pressing the One-
Touch Speed Calling key, dialing the extension,
and pressing the
will display on LCD if it is programmed and saved
on the terminal.)
Note: If called party is on their line when a Voice Call is
attempted, calling station's display indicates as
follows:
VOICE BUSY
1:25 PM
Note: A voice call is restricted if called party's station is
not a DT Series. Display indicates as follows:
VOICE REST
1:25 PM
133
2000
MON 11 MAY 2015
Voice >>>
key. (The VOICE key
Transfer
MON 11 MAY 2015
MON 11 MAY 2015