NEC DT830 Series User Manual page 191

STEP 11:Select either
Select an item by one of the following operations.
• Highlight an item by using
and then press
1 2
• Press or
key.
A maximum of four telephone numbers can be set
2
to an entry. If
phone number which is being edited will be given
top priority. In that case, the telephone number is
automatically selected when you make a call with-
out specifying a specific telephone number.
[Priority Flag]
1 Disable
2 Enable

STEP 12:The display goes back to the Edit screen
again. Select
Select an item by either of the following operations.
• Highlight an item by using
or OK soft key.
7
• Press key.
Note:
A maximum of four telephone numbers can be
set to an entry. If two or more telephone numbers
are required to be set, set the remaining tele-
phone numbers to Tel #2 - Tel #4.
Note: If multiple telephone numbers are registered to
an entry and Priority Flag is disabled to all of the
telephone numbers, the telephone number set to
Tel #1 is automatically set as first priority number.
1 2
Disable or Enable.
or UP/DOWN soft key,
or OK soft key.
key, and then press or OK soft
Enable is selected here, the tele-
1
Prev OK
7
Company Name.
, and then press
[Edit]
1
2
3
4
5
6
7
8
9
0
Save
STEP 13:Enter a company name.
Enter a company name by using digits keys. After enter-
ing the company name, press
[Company Name]
Input a Company name.
,
Note: Up to 32 characters can be entered as a com-
pany name. For details on character entry
method, see
182
Ken Kobus
Gr
Colleagues
31300
Tel #2
Tel #3
Tel #4
Company Name
Ring Tone
Illumination
No
0
Back
A
BK Option Back
HOW TO INPUT
OK
or OK soft key.
OK
CHARACTERS.