NEC DT830 Series User Manual page 192

STEP 14:The display goes back to the Edit screen. Se-
8
lect Ring Tone.
Select an item by either of the following operations.
• Highlight an item by using
or OK soft key.
8
• Press key.
[Edit]
1
Ken Kobus
Gr
Colleagues
2
3
31300
4
Tel #2
5 Tel #3
Tel #4
6
7 NEC
8
Ring Tone
9
Illumination
No
0
0
Save
STEP 15:Select a desired Ringing Tone.
Select an item by either of the following operations.
• Highlight an item by using
and then press
0 9
• Press -
key.
, and then press
Back
OK
or UP/DOWN soft key,
or OK soft key.
key, and then press or OK soft
[Ring Tone]
1
,
2
3
16
17
18
19
Note: You can set ringer tone for calls routed to the
specified name (calling party) here. Ringer Tone
type can be set for "Name", "Group" and "Tele-
phone set". The ringer Tone type set for "Name"
has higher priority than the types set for "Group"
and "Terminal set".
Note: Set 2 Default when you don't want to change the
ringer tone here. The setting for "Group" or "Tele-
phone set" is applied. Also, when 1 Automatic is
set, 3 Tone Type 1 is automatically applied.
Note: For details on each ringer tone type, see
RINGER
183
Automatic
Default
Tone Type 1

Tone Type 14
Download 1
Download 2
Download 3

Back OK
TONE.
TO SET