NEC DT830 Series User Manual page 85

STEP 23:After the downloading process is complete,
the display changes as follows:
Download Complete!
The display goes back to the Download
Files screen with the Exit soft key.
Note:
When the downloading process ends in failure,
"Downloading Failed!" is displayed on the LCD.
Check to see the following and then retry.
Check Points
Download file is not
placed in the specified
directory.
A different file name is
specified between
DT830 Series and FTP/
TFTP server.
Incorrect IP address of
FTP/TFTP server has
been entered from the
telephone.
The power to FTP/
TFTP server or network
equipment is OFF.
LAN cable is
disconnected.
Exit
Actions
Place the download file in the
specified directory.
Set the same file name from
both DT830 Series and FTP/
TFTP server.
Set the proper IP address of
FTP/TFTP server.
Turn on the power.
Reconnect the cable
securely.
• TO BACKUP PERSONAL SETTINGS
The DT830 Series user can backup personal settings
of the terminal to the FTP/TFTP server. To back up the
setting data, the terminal needs to be connected to the
FTP/TFTP server.
Note: For details on the FTP/TFTP service, contact the
System administrator.
Before starting the backup, the IP Address of the FTP/
TFTP server must be entered from the terminal.
STEP 1: Set up the FTP/TFTP server.
<FTP server>
Confirm the designated directory (for Win-
dows IIS, the default is "C:\InetPub\ftproot")
for the backed up file.
<TFTP server>
Specify a desired destination directory for the
backed up file.
STEP 2: Display the Menu screen, and select Setting.
3
STEP 3: Select
Select an item by either of the following operations.
• Highlight an item by using
key, and then press
3
• Press
76
Data Backup/Restore.
or the UP/DOWN soft
, or the OK soft key.
key.